DIY Lazy Susan: A Step-by-Step Guide

Making a DIY Lazy Susan for your table is a simple and practical project that adds convenience and functionality to your dining experience. In this guide, we’ll walk you through the steps to create your own Lazy Susan using readily available materials.

Materials Needed:

  • Circular wooden board (prefabricated or cut to size)
  • Lazy Susan hardware kit (including bearings and screws)
  • Drill
  • Screwdriver
  • Sandpaper
  • Paint or stain (optional)
  • Paintbrush or rag (if painting or staining)

Prepare the Wooden Board

Start by ensuring that your circular wooden board is smooth and free from any rough edges. If necessary, use sandpaper to sand the surface of the board until it’s smooth to the touch.

Attach the Lazy Susan Hardware

Place the Lazy Susan hardware kit on the underside of the wooden board, positioning it in the center. The hardware kit should include bearings and screws. Use a pencil to mark the locations for drilling holes to attach the hardware.

Drill Holes

Using a drill, carefully drill holes through the wooden board at the marked locations. Be sure to choose a drill bit that is slightly smaller in diameter than the screws included in the hardware kit to ensure a snug fit.

Attach the Hardware

Place the bearings over the drilled holes on the underside of the wooden board. Then, using the screws provided in the hardware kit, secure the bearings in place by screwing them into the pre-drilled holes.

Test the Rotation

Once the hardware is securely attached, flip the wooden board over and test the rotation of the Lazy Susan. It should spin smoothly and freely. If there are any issues with the rotation, double-check that the bearings are properly seated and the screws are tightened securely.

Sand and Finish (Optional)

If desired, you can sand the edges of the wooden board once again to ensure a smooth finish. Additionally, you can paint or stain the wooden board to match your table or decor. Apply the paint or stain using a paintbrush or rag, following the manufacturer’s instructions, and allow it to dry completely.

Place on Your Table

Once the paint or stain has dried, place your DIY Lazy Susan in the center of your table. It’s now ready to use for serving condiments, sharing dishes, or simply making it easier to reach items during meals.

Optional Tips:

  • Consider using a decorative wooden board or adding embellishments such as wood burning or stenciling to personalize your Lazy Susan.
  • For a more rustic look, you can use reclaimed wood or repurpose an old wooden tray or tabletop to create your Lazy Susan.
  • If you’re concerned about the stability of your Lazy Susan, you can add rubber feet to the underside of the board to prevent slipping and provide additional grip.


Making your own DIY lazy susan for table is a fun and practical project that can be completed in just a few simple steps. By following this guide and using basic tools and materials, you can create a convenient rotating platform for your table that adds both functionality and style to your dining experience. Enjoy the convenience of easily sharing dishes and condiments with friends and family with your homemade Lazy Susan!

Leave a Reply

Your email address will not be published. Required fields are marked *